SyQwest IncOffice (401) 921-5170         
Fax (401) 921-5159         
 

Setting Date and Time on a Bathy-500 Series echosounder
 

Depressing the DATA key causes the status display page as shown below, to be displayed.

This display page, denoted status display, provides the user with a summary of the important parameters; Date, Time, Position, (if GPS data is present), Depth Alarm (if active) and Depth are shown

 Depressing the DATA key a second time calls up the second page for this key; This page allows the user to set the Time and Date. The second page (to the DATA key) is shown below.

SET TIME & DATE
To set the month (if the double cursor is below the month designation), use the INCREMT and DECREMENT (arrow) keys to change the month. To move from month to day (and then year), depress the DATA key ; Each time using the INCREMENT and DECREMENT keys to change the value. Time is set in the same manner using the DATA key to move the cursor. To accept all values either depress the ENTER key or wait until the unit reverts to the status display page (this will occur after about ten seconds    <back>