Depth Ranges
|
- Units of 0-5; 0-10;
0-20, 0-40:0-200; 0-400; 0-800;0 - 2000; 0 - 5000 Units.
- Manual and Auto ranging modes.
|
Phasing
|
Phase and Auto
Phasing at depth ranges of 400 units. Phase from 0-400,
200-600, 400-800, etc. up to 4600-5000 Units. |
Units
|
Meters or Feet. |
Operating Modes
|
Single or
Interleaved Dual Frequency |
Frequencies
|
12 kHz; 24 kHz; 33
kHz; 40 kHz; 100 kHz; 200 kHz |
Resolution
|
- 1 cm or .1ft <=99.9
units
- 10 cm or .5ft >99.9 units
|
Accuracy
|
Meets or exceeds all current IHO
hydrographic requirements for single beam echo
sounders 0-40m 2.5cm, 40-200m 5.0cm, >200m 10.0cm |
Audio Alarm
|
User controlled
audio alarm for shallow water, deep water and bottom lost
conditions. |
Alarm Contact Closure
|
Relay contact, 120
VAC @ 0.5 Amps or 24 VDC @ 1.0 Amps (maximum). |
Sounding Rate
|
Maximum 18Hz; depth
range and operating mode dependant. |
Transmit Power
|
2 kilowatt (maximum)
both Channel 1 and Channel 2 |
Sound Velocity
|
1400-1600
meters/second or 4595-5250 feet/second, user selectable in 1
unit increments. |
Depth from Measurement
|
Provides depth
measurements in the following modes: Depth Below Surface
(DBS) or Depth Below Transducer (DBT). |
Data Output
|
- NMEA0183 Version 1.5,
2.0 and 2.1 strings:
- (9600 or 19200 baud, string
dependent, No parity, 8 bits, 1 Stop bit) DBT, DBS and
DPT.
- ODEC proprietary serial
strings-
- ODEC HEAVE, ODEC DEPTH, and
ODEC BINARY for graph data output.
- Backwards compatible outputs-
- ODOM DBT, ODOM SBT, ATLAS
DESO 25.
- Jumper selectable RS-232 or
RS-422.
|
Data Input
COM 1
|
- NMEA0183 Version 1.5,
2.0 and 2.1 strings:
- (4800, 9600 or 19200 baud,
string dependent, No parity, 8 bits, 1 Stop bit)
- GLL, GGA, RMC, RMA, VTG, ZDA.
- ODEC Proprietary Annotation
String Input ANN.
- Jumper selectable RS-232 or
RS-422.
|
Data Input
COM 2
|
- Heave Input :
- TSS, TSS1 or Seatex SOUNDER
format, variable input rates,
- 9600, or 19200 depth output
string dependent.
- Remote Annotation, Remote Fix
Mark (ODEC Proprietary or ODOM compatible)
- External Synchronizatioin
(sonar synch) and External Control.
|
Interference Rejection (IR)
Filter
|
Removes ambient
water column noise and/or simultaneous transmissions from
other acoustic systems within the frequency bandwidth of
operation. |
Graphic Display
|
640 x 480 pixels; 16
grey shades,Cold Cathode Flourescent Lighting ( CCFL)
backlit flat panel display. |
Graphic Display Speed
|
Off to 20> cm/min on
LCD Display. Off to >9 cm/min on TDU hardcopy output. |
Remote Display Output
|
- Transmits proprietary
serial string (4800, 9600 or 19200 baud, No parity, 8
bits, 1 Stop bit), RS-422.
- Power supplied via Bathy-1500
Main Unit.
|
Internal Flash Storage
|
Stores at 1 second
intervals, resolution of digitized bottom depth and
position, up to eight hours of operation. Stores at 1 second
intervals, up to 150 minutes of graph (acoustic return) data
and position. |
External Mass (Disk) Storage
|
Optional adapter
cable; Enables storage of all ASCII text data for depth,
position, speed, course, annotation and parameters and/or
acoustic graph information through paralell port interface
to a SCSI compatible device. |
Printer Output
|
Centronics (parallel
port) interface to TDU 850 Series thermal grey scale
recorders |
Input Power
|
115 / 230 VAC
(switch selectable) 50 / 60 Hz; 60 Watts Nominal (80 Watts
with three remotes attached). |
Dimensions
|
39.4cm (15.5")
width, 29.21 cm (11.5") height; and 21.59 cm (8.5") deep |
Weight
|
10.7 kg (23.5 lbs.) |